When designing your LAN or WAN the logical solution in relation to your expected usage may often indicate multiple T1 lines. In this case bonded T1 could be the best choice. However, before you jump you need to know just what a bonded T1 really is and what it can….and can’t….do for you.

A bonded T1 just means that the you have two T1 lines (from the same provider) which have been joined together in a special way so that you can use the combined total of 3.0 Mbps of Internet data or the 46 channels for voice/phone use. You cannot bond T1’s together if they are not through the same provider.

If you were to have two T1’s, unbonded, then you could not use the full 3.0 Mbps of bandwidth all at once. For example, if you did a speed test, you wouldn’t be able to get a result of “3.0 Mbps”, the max you could download/upload at any one time would be 1.5 Mbps, even though you had two T1’s. I know it doesn’t make sense because you think that 1.5+1.5=3.0. It doesn’t work like that. Unless your T’s are bonded, you can only use the 1.5 Mbps of bandwidth that each line provides….seperately. You can do two download tests, at separate download test sites, and get a full 1.5 Mbps reading at each download site. But with out bonding, there isn’t a way of getting a test result of 3.0 Mbps. Think of it in terms of cars: You can either have two slow Datsun pickups or one Ram 4×4 with a 5.7L Hemi. Sometimes, two slow pickups are better for reliability than one big Ram 4×4, but not as big and fast.

There are exceptions to this of course, and there’s probally better ways of explaining it, but this will give you a general idea.

You can bond quite a few T1 together by the way, you’re not limited to just two. The maximum is usually around 4 T1’s although some have gone as far as 8. However, if you go beyond 4 bonded T1’s it makes much more sense to start looking at a fractional/burstable DS3. That decision than rests on the combination of capability requirements and cost efficiency in relation to the intended application(s).

It’s best that you use the services of a telecommunications consultant to walk you through all of your choices for network design utilizing a bonded T1. If you need more than what a bonded T1 can provide….such as a fractional or full DS3….you should also make use of consultant srevices. Many such services are usually no cost to you….and will enable you to more effectively and efficiently find the best solution for your specific application(s).

Michael is the owner of FreedomFire Communications….including DS3-Bandwidth.com and Business-VoIP-Solution.com. Michael also authors Broadband Nation where you’re always welcome to drop in and catch up on the latest BroadBand news, tips, insights, and ramblings for the masses.

Internet & Web Sites : Speed Test for a Broadband Connection

You may be in for a surprise if you’re planning to sign up for dial-up Internet. Although dial-up modems were always installed on computers in the past, many computers are now being sold without them. In order to avoid having problems once you’re paying for Internet services, you should check whether your computer has a dial-up modem installed. There are two areas to look for a dial-up modem.

First, look at the back of your system unit, or tower. There should be a port that looks just like the telephone jack in the back of a telephone and in the wall. You can use a regular phone cord to test whether the port is the right size (if it’s too big, it’s not the right port). You will find one of these three scenarios:

1. There is only one a port, but it is slightly larger than a regular phone port. This is the Ethernet port used for broadband connections, like cable and DSL. If this is the only port you have, you do not have a dial-up modem.
2. There is one telephone port (often along the bottom, but not always) and a telephone cord fits in it snugly. You have a dial-up modem! If you are planning to use a telephone on the same phone jack your computer is using, plug a splitter in the wall jack, then plug in two phone cords into the splitter for each device.
3. There is two ports side by side that fit the telephone cord. You found your dial-up modem! The reason you have two ports is because one is to plug a phone cord coming from the wall and the other is to connect a telephone to use when you are not online. The port marked “line” or showing a picture of a phone jack is for the cord coming from the jack in the wall. The port reading “phone” or showing a picture of a telephone is where you plug a phone cord leading to your telephone.*Note: You do not need to use the “phone” port. Also, keep in mind that if you accidentally plug the wall jack line into the “phone” port instead of the “line” port, you will not be able to connect!

If you do not have a modem, you need to buy one. If you do, the following steps will show you how to check if your modem software is installed properly.

1. Open Control Panel, then make sure you are in classic view if you have XP or Vista.
2. Open your modem options. On older versions of Windows, you’ll see “Modems”, and on 2000 or newer, you’ll see “Phone and Modem Options”.
3. Click on the “Modems” tab (skip this step if you have an older computer).
4. Here is a box listing the modem(s) installed on your computer.
5. Beside the modem it lists where it is connected. It will either have “not present”, or “COM” and a number. (On older computers, click properties for the modem in question and look for “Port:” Your modem must be listed as attached to one of the COM ports, or you modem has been removed or corrupted. If this is the case, you must either reinstall, repair, or replace the modem.

If you have a modem both installed in the tower and listed as properly installed, you are ready to sign up for dial-up. Other minor issues could occur once you try to connect, however, you will be better prepared and less likely to have connection issues upon starting your new service.

Written by Hannah Miller, Director of Online Marketing and Customer Service Rep, Copper.net. Copper.net is a nationwide Internet Services provider that is all-American owned and operated. Call today, 1-800-336-3318 or sign up online. Check out my blog for this and more great articles! http://www.copper.net/wire.

(HD) Speed Test On My New Virgin Media Cable Connection 20Mbps

You have two main tasks to perform to be able to use internet advertising effectively, which are are ad creation and ad dissemination. You have to plan how to achieve dissemination. Also, planning helps you determine which media to use–be it T.V. programs, newspapers, buletin board posters, ppc ads on the Web, or on Facebook. It also tells you when, where, and which media to use in order to reach your desired audience. Simply put, planning refers to the process of selecting time and space to disseminate ad messages in order to accomplish marketing objectives. When advertisers run commercials during the Super Bowl game at more than $2.5 million per thirty-second spot, for example, planing is involved in the negotiation and placement.

How is a plan developed? The planning process takes a four-steps which consists of 1) setting your objectives using your marketing and advertising strategy, 2) developing a strategy for implementing a specific media, 3) designing tactics for realizing that strategy, and 4) proposing procedures for finding out how successful is the plan.

The Number one purpose of a plan is to select the audience you want to reach. It is essential to understand how the target audience is defined in the Internet marketing objectives.A common marketing objective is to increase sales by a specific amount. But this does not tell you who is your target audience, which is why you need to determine who or what your target audience is.

The target audience is often defined in terms of demographics, but, Some advertisers believe that demographic definitions of an audience are too ambiguous, because individuals that fit such definitions are usually very different in terms of their desired brands and purchase behavior.

Target audiences can more than likely be more precisely defined by the ways they consume the products. Product usage includes both brand and category usage.You could also say the size of a target audience is very important, how many people or households fit the definition of your audience. Knowing the actual size helps advertisers to estimate the potential buying power of the target audience.

Now, you must make three crucial decisions. Where, When, and what media to use. Also, you have to make these decisions in the face of budget constraints. In other words, how do you get the best return on your investment?

The answer is obviously cell phone marketing, because cell Phones are hip, hot and everywhere on the planet. Just imagine, four Billion people who use their cell phones countless times per day. And all this is happening world wide, not just locally. This makes your customer base so huge it is unable to be counted,and the growth is not going to stop any time soon. The market just keeps getting more enormous as time marches on. The best way to reach the most people possible in the shortest period of time, is via their cell phone. This is easier than using any other media on the planet.

There are more people with a cell phone than a television, computer, Internet or any other media you can think of! Now, what if there was a way to make money within this huge pool of potential customers? Well, how about this? Use the cell phone network the same way as you would the Internet.

The difference with this method, is that you are putting your ads in front of people and they do not even have to search for them. And they only see the ads if they are already searching for the item that you are selling, imagine that!

There are several services that allow you to send messages to people through their cell phones, and These services have never been advertised by any of the top “Gurus” or Internet coaches.They are also 100% legit. The last thing you want to do is to use a service that is involved in illegal practices.

The best thing about cell phone marketing is that the cell phone market is virtually un-tapped. Having this method is like being the first person to start using ppc ads way back when. Just think, how much money would that person have made?

This is the same situation, it’s a brand new market for advertisers, and with 4.3 Billion people using cell phones and tens of thousands more joining every day there is not, nor will there ever be any danger of over-saturation.

From USA Today, “Important for global marketers, mobile handsets are the dominant way people access the Web in many emerging markets, as it is far cheaper”, says John Gauntt, senior analyst at digital ad tracker eMarketer. “With a computer, The cost of entry to get Internet access is about $1,200 for the PC and broadband; a mobile is less than half the cost.”

Also in USA Today, “The pace for mobile won’t be set in the U.S.,” says Michael Baker, vice president and head of Nokia Interactive Advertising. “It’s a global medium that’s different from all other channels. It’s cost effective and usually the centerpiece of a strategy. (That’s) very different from what’s going on in the U.S., which is mini-banner ads.”

About the Author:

If you want to get in on the ground floor to this exciting new marketing opportunity, the author suggests the following site;
http://cellphonemarketing.blogspot.com/

Article Source: ArticlesBase.com – Cell Phone Marketing/Internet Advertising

The TeleVerus Wireless Communications Plans Can Make You Wealthy

Some time ago people had no idea about the internet and wireless networks. At which time people could not even imagine that latterly advanced mankind would invent something like it. Nowadays civilization cannot imagine itself without the internet: emails, letters, messengers, sites’ navigation, chats etc. This is a modern style of communication. Within the last 10 years the internet probably became the second most interesting thing after sex. The Internet is the most popular thing amongst people. More and more people are being involved in internet using. Internet services are trendy because each person can find particular sorts of information regarding his or her demands. And this kind of information in an immense amount is offered with the high speed and arranged as well classified in directories and categories.

Then network by wireless comes onto the internet stage. Today WiMAX is easily reached in all distant places. By the way, in some situations wireless networks are more useful as it can penetrate into the locations where wired internet is not accessible. Thus it can help to save somebody’s life, inform about a fire or transfer other vital information. The device that is used in wireless broadband internet is a satellite dish. Yes, you are absolutely right. Satellite dish can provide a wide range of channels as well as offer wireless networks. Especially, for people living in rural areas network by wireless can be the only opportunity to get internet access. Of course, wireless broadband internet service is an expensive treat. On the other hand, if you live in the countryside and run your own home business, then WiMAX is a considered necessary service for you.

Services are differing. It can be just a satellite bond or a combined connection. For example, downloads are dispatched via satellite and uploads are performed through phone lines. Even in practically impossible internet access locations people are able to take advantage of surfing cyber space. Wireless Ethernet allows people to enjoy benefits of using the internet out of their own homes. Originally, wireless ethernet was set up and widely used in internet- cafes. With the lapse of time it became available in libraries, coffee shops, restaurants, hotels, airports and even in some snack food places. Also this kind of wireless ethernet is available at college/ university campuses, business conferences etc. Hence, mobility means contacting and productivity. What do you need? Just a wireless card is needed inside your laptop. And then you can have fun navigating internet waters! Usually some companies offer free wireless internet services, but in some places you can find a cost per minute. I have made an observation that recently many young people use their mobiles to access the internet. Cellular is a practical and possible mean to connect to the internet. Sure, that download speed is rather slower but you can read your email or connect in an urgent case. Particularly, it really helps when you need to manage your business and sort some issues when you are away from your desk.

UK Telecom can assure you that wireless networks are becoming more and more widespread. Why do we think so? The most important feature is your ability to stay connected to the information you need. Only wireless service can provide you with such an opportunity to get internet in any circumstances whether it is a connection through a mobile phone, a card inside your PC or satellite. Network by wireless cares about your needs.

About the Author:

MLL Telecom designs, deploys and fully manages end-to-end, wireless network, wide area network, hybrid networks. Who we are? We are the UK Telecom leading company working in wire as well as wireless connectivity for more than 16 year. Thus, our team of professionals can provide you with the high- quality service in this sphere. If you want to install a wireless network, MLL Telecom would be glad to help you.

Article Source: ArticlesBase.com – Why Wirelesses Internet Connection is so Attractive Nowadays?